Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5440442 | Journal of the European Ceramic Society | 2017 | 15 Pages |
Abstract
Balance of better mechanical strength and good translucency for dental restorative materials is always a challenge. A translucent glass ceramic/ceramic with improved mechanical properties or a strong glass ceramic/ceramic with good translucency would therefore be interesting for dental application. Nanocrystalline glass ceramics (NCGC) attract a lot attention because of their superior optical and mechanical properties. This study aims to obtain ZrO2-SiO2 nanocrystalline glass-ceramic that possesses high mechanical strength as well as excellent translucency by controlling the content, size, and connection of nanocrystalline ZrO2 in a ZrO2-SiO2 glass-ceramic material. Toward this end, well-homogenized nano-powders with three different compositions, 45%ZrO2-55%SiO2 (molar ratio, 45Zr), 55%ZrO2-45%SiO2 (55Zr), and 65%ZrO2-35%SiO2 (65Zr), were synthesized, followed by a fast sintering process. Highly-translucent nanocrystalline glass ceramics composed of tetragonal ZrO2 were obtained. Samples with high zirconia content showed that the structure of the skeleton was predominately built by nano-sized ellipsoidal ZrO2 particles bonded by grain boundaries, with amorphous SiO2 filling the voids between the ZrO2 particles. The achieved flexural strength measured by piston-on-three-ball test was as high as 1014Â MPa. To our knowledge, this is one of the highest flexural strength values of glass ceramics ever reported, which is higher than transparent zirconia and alumina ceramics. The 3D structure of nanocrystalline zirconia in silica matrix did enhance the flexural strength of the NCGC. The results of this study suggest that the new ZrO2-SiO2 NCGC has great potential of using as dental restoration.
Related Topics
Physical Sciences and Engineering
Materials Science
Ceramics and Composites
Authors
Le Fu, HÃ¥kan Engqvist, Wei Xia,