Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5459798 | Journal of Alloys and Compounds | 2017 | 15 Pages |
Abstract
Aluminum-TaC composites containing 5, 10 and 15 wt% TaC as reinforcement particles were prepared by spark plasma sintering method. A high-energy ball mill was used to mix initial powders. All of the samples were sintered at 450 °C and the measurement results indicated that the maximum relative density, bending strength were achieved with 5 wt% TaC. XRD investigations revealed only aluminum and TaC as identified phases and no additional phase was detected due to the reaction between matrix and reinforcement particles. SEM observations and EDS analyses demonstrated the agglomeration of reinforcement particles in composites containing 10 and 15 wt% TaC, while the uniform distribution of aluminum and TaC particles was found in composite containing 5 wt% reinforcement.
Related Topics
Physical Sciences and Engineering
Materials Science
Metals and Alloys
Authors
Ehsan Ghasali, Kamyar Shirvanimoghaddam, Amir Hossein Pakseresht, Masoud Alizadeh, Touradj Ebadzadeh,