Multi-scale modelling and measurements of diffusion through porous catalytic coatings: An application to exhaust gas oxidation

Novel experimental and computational methods to investigate diffusion in catalytic coatings are presented and demonstrated with Pt/γ-Al2O3 oxidation catalyst. The catalytic layer with defined particle and pore size distributions is coated on metal plates and subsequently overlaid by an inert layer acting as an additional diffusion resistance. The samples are tested in a lab reactor for CO oxidation and diffusion-limited regime is reached above the light-off temperature. Comparisons of the results obtained with the samples coated by active layer only and the samples additionally coated by an inert layer reveal the extent of diffusion limitations.The computational part is based on digital reconstruction of the porous layer as a 3D matrix; this is achieved using macroporosity obtained from SEM cross-section images, and measured particle size distributions. Reaction and diffusion are then simulated within a small layer section and the spatially averaged results are employed in the full-scale model of the entire reactor. The simulated light-off curves are in good agreement with the experimental data. Depending on the actual γ-Al2O3 particle size distribution, the predicted effective diffusivities of CO at 298 K are 2.6 × 10−6 m2 s−1 and 4.2 × 10−6 m2 s−1 (for γ-Al2O3 particles d90 = 7 μm and d90 = 22 μm, respectively), whereas the classical random pore model predicts approximately 25–45% lower diffusivities.

Graphical abstractFigure optionsDownload full-size imageDownload high-quality image (255 K)Download as PowerPoint slideHighlights► Novel method for evaluation of diffusivity in porous coating is proposed. ► Defined Pt/Al2O3 layers are overlaid by inactive Al2O3 of the same structure. ► CO oxidation is measured in the diffusion limited regime. ► Detailed model of diffusion in 3D reconstructed medium agrees with experiments. ► CO diffusivity is 2.6 × 10−6–4.2 × 10−6 m2 s−1 (at 25 °C), depending on porous structure.