| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 5746111 | Chemosphere | 2017 | 9 Pages |
â¢Inexpensive and simple fabrication route for flexible composite nanofibers systems.â¢High adsorption removal efficiency was obtained compared to other reported studies.â¢Stability of the fabricated composite nanofibers allowing their reuse.â¢The flexibility of the nanofibers allows use in a continuous operation mode.
:A novel composites nanofiber was synthesized based on PAN-CNT/TiO2-NH2 nanofibers using electrospinning technique followed by chemical modification of TiO2 NPs. PAN-CNT/TiO2-NH2 nanofiber were characterized by XRD, FTIR, SEM, and TEM. The effects of various experimental parameters such as initial concentration, contact time, and solution pH on As removal were investigated. The maximum adsorption capacity at pH 2 for As(III) and As(V) is 251Â mg/g and 249Â mg/g, respectively, which is much higher than most of the reported adsorbents. The adsorption equilibrium reached within 20 and 60Â min as the initial solution concentration increased from 10 to 100Â mg/L, and the data fitted well using the linear and nonlinear pseudo first and second order model. Isotherm data fitted well to the linear and nonlinear Langmuir, Freundlich, and Redlich-Peterson isotherm adsorption model. Desorption results showed that the adsorption capacity can remain up to 70% after 5 times usage. This work provides a simple and an efficient method for removing arsenic from aqueous solution.
Graphical abstractDownload high-res image (133KB)Download full-size image
