Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
575965 | Journal of Hazardous Materials | 2015 | 9 Pages |
Abstract
Efficiency of modern wastewater treatment plants to remove or decompose persistent contaminants in low concentration is often insufficient to meet the demands imposed by governmental laws. Novel, efficient and cheap methods are required to address this global issue. We developed a new type of plasma reactor, in which atrazine decomposition by atmospheric dielectric barrier discharge (DBD) in dry air is combined with micropollutant adsorption on activated carbon textile and with extra bubbling of generated ozone. Investigation of reaction kinetics and by-product analysis shows that increasing input power with a factor 3.5 leads to deeper atrazine oxidation without significantly changing energy yield of atrazine removal. By-products of first and later generations are detected with HPLC-MS analysis in water and adsorbed on the activated carbon textile. Our reactor is compared in energy efficiency with reactors described in literature, showing that combination of plasma discharge with pollutant adsorption and ozone recycling is attractive for future applications of water treatment.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Chemical Health and Safety
Authors
Patrick Vanraes, Gert Willems, Anton Nikiforov, Pieter Surmont, Frederic Lynen, Jeroen Vandamme, Jim Van Durme, Yannick P. Verheust, Stijn W.H. Van Hulle, Ann Dumoulin, Christophe Leys,