Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5784564 | Physics and Chemistry of the Earth, Parts A/B/C | 2017 | 42 Pages |
Abstract
The electrospinning of a nanofiber composite of polyvinylidene fluoride (PVDF) and polyacrylonitrile (PAN) in a dimethylformamide (DMF) solvent was carried out prior to functionalization by free radical grafting of acrylic acid (AA) brushes. Subsequent application for the removal of Pb2+ and Cd2+ from contaminated water is reported. Free radicals were initiated on the polymeric nanofiber composite using 5% 2,2â²-Azobis(2-methylpropionitrile) (AIBN) in acetone. Upon solvent removal by air-drying, AA was added and grafting (in a methanol-water solvent system) was carried out in an oil bath at 70 °C for 5 h under nitrogen atmosphere. Structural and chemical characterization of the composite was done using scanning electron microscope (SEM), nitrogen sorption at 77 K (BET method), goniometer and Fourier transform infrared spectrometer (FTIR), while changes in metal ion concentration during batch adsorption were monitored using inductively coupled plasma optical emission spectrometer (ICP-OES). Through isotherm study, the adsorption was confirmed to follow both Langmuir and Freundlich models whilst adsorption kinetic studies showed that the adsorption rate is of pseudo-second order. In furtherance, the respective values for adsorption capacity and estimated removal efficiency for Pb2+ and Cd2+ were 1.585 and 0.164 mg gâ1, 90% and 80% respectively, while a 5% loss in regeneration efficiency after 10 cycles was also observed. Consequently, the nanocomposite was found efficient when applied to the removal of Pb2+ and Cd2+ from contaminated water.
Related Topics
Physical Sciences and Engineering
Earth and Planetary Sciences
Geochemistry and Petrology
Authors
R.M. Nthumbi, A.A. Adelodun, J.C. Ngila,