A comparison of tensile failure in 3D-printed and natural sandstone

The indirect tensile strength of the artificial sandstone specimens ranged between 1.0 and 2.8 MPa. Natural sandstone specimens with a wide range of indirect tensile strengths were tested for comparison. These included a strong sandstone, an intermediate sandstone, and a weak sandstone; which were found to have indirect tensile strength ranges of 10.5-25.5 MPa, 4.4-6.4 MPa, and 0.9-1.1 MPa, respectively. Digital image correlation confirmed that the artificial specimens generally failed in a tensile (mode I) fracture, similar to the natural specimens. Likewise, fracture surface roughness measures showed no clear distinction between weak natural and artificial sandstones. This indicates that there are distinct similarities between the fractures generated in the natural and artificial sandstones of comparable indirect tensile strengths. The three-dimensionally printed sandstone specimens are shown to exhibit indirect tensile strength, surface roughness and crack propagation behavior which resembles a weak natural sandstone.