Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
581575 | Journal of Hazardous Materials | 2009 | 10 Pages |
Abstract
Magnetic fractions (MFs) in fly ashes from eight coal-burning power plants were extracted by magnetic separation procedure. Their mineralogy and potential leachability of heavy metals were analyzed using rock magnetism, X-ray diffraction (XRD), scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (SEM/EDX) and leaching procedures (toxicity characteristics leaching procedure by the United States Environmental Protection Agency, TCLP, and gastric juice simulation test, GJST). Results show that the MFs in the fly ashes range between 2.2 and 16.3 wt%, and are generally composed of magnetite, hematite, quartz and mullite. Thermomagnetic analysis and SEM/EDX indicate that the main magnetic carrier magnetite is substituted with small amounts of impure ions, and its structures are featured by rough, dendritic and granular iron spherules. The MFs are found to be rich in Fe, Mn, Cr, Cu, Cd and Pb. Compared with the non-magnetic fractions (NMFs), the MFs have about 5 times higher iron, and 1.6 times higher Mn, Cr, Cu and Cd concentrations. The TCLP test shows that the TCLP-extractable Cr, Cu, and Pb concentrations in the MFs are higher than those in the NMFs, while the TCLP-extractable Cd concentration in the MFs and NMFs is below the detection limit (<0.1 mg/L). The GJST-extractable Cd, Cr, Cu, and Pb concentrations in the MFs are higher those in the NMFs. No significant difference in the leachability ratio of Cr, Cu and Pb with TCLP and GJST is found in the MFs and NMFs. However, the GJST test showed that Pb has higher leachability in MFs than that in NMFs. The leachability ratio of heavy metals has an order of Cu > Cr > Pb > Cd. The heavy metals of fly ashes have a great potential to be released into the environment under acid environment.
Keywords
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Chemical Health and Safety
Authors
S.G. Lu, Y.Y. Chen, H.D. Shan, S.Q. Bai,