Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
581859 | Journal of Hazardous Materials | 2009 | 5 Pages |
Abstract
A new method that utilizes zincon-modified activated carbon (AC-ZCN) as a solid-phase extractant has been developed for simultaneous preconcentration of trace Cr(III) and Pb(II) prior to the measurement by inductively coupled plasma optical emission spectrometry (ICP-OES). The separation/preconcentration conditions of analytes were investigated, including effects of pH, the shaking time, the sample flow rate and volume, the elution condition and the interfering ions. At pH 4, the maximum adsorption capacity of Cr(III) and Pb(II) onto the AC-ZCN were 17.9 and 26.7 mg gâ1, respectively. The adsorbed metal ions were quantitatively eluted by 1 mL of 0.1 mol Lâ1 HCl. Common coexisting ions did not interfere with the separation. According to the definition of IUPAC, the detection limits (3Ï) of this method for Cr(III) and Pb(II) were 0.91 and 0.65 ng mLâ1, respectively. The relative standard deviation under optimum condition is less than 3.5% (n = 8). The method has been applied for the determination of Cr(III) and Pb(II) in biological materials and water samples with satisfactory results.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Chemical Health and Safety
Authors
Zhenhua Li, Xijun Chang, Zheng Hu, Xinping Huang, Xiaojun Zou, Qiong Wu, Rong Nie,