Article ID Journal Published Year Pages File Type
583058 Journal of Hazardous Materials 2008 6 Pages PDF
Abstract
Carbon-supported copper (Cu/GAC) catalyst was prepared by conventional impregnation method and characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The sizes of Cu particles dispersing on the surface of GAC were 0.3-1.5 μm, which could be penetrated by microwave so that Cu/GAC catalyst could absorb microwave energy effectively. The catalysis of Cu/GAC in microwave assisted catalytic oxidation of p-nitrophenol (PNP) in aqueous solution was investigated through a fixed bed reactor under ambient pressure and continuous flow mode. PNP removal reached 91.8% under optimized conditions, corresponding to 88% of TOC removal. It showed a higher PNP degradation and total organic carbon (TOC) removal for Cu/GAC catalyst than GAC alone, and Cu/GAC catalyst kept on a high catalysis and a good stability for a long time run, which indicated that GAC structure and catalytic capacity were improved by the load of Cu.
Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Health and Safety
Authors
, , , ,