Effect of improving flue gas cleaning on characteristics and immobilisation of APC residues from MSW incineration

The flue gas cleaning system of a MSW incinerator with a capacity of 350 kt/year was changed to improve the HCl elimination efficiency. Instead of the semi-wet operating spray reactor and subsequent baghouse, a two-step wet flue gas cleaning was added behind the baghouse.Elemental composition, X-ray powder diffraction patterns and TGA measurements showed that the resulting APC residue was totally different from the former residue. As a consequence, leaching characteristics of both residues also differed and another treatment was required prior to disposal.For the former residue, mainly leaching of Pb (>100 mg/l), necessitated treatment prior to landfilling. The lower alkalinity of the new residue resulted in a leachate pH of 9.7 and a Pb concentration of 0.8 mg/l. The leachate pH of the former residue was 12.4. The leaching of Pb and Zn increased above 100 mg/l when immobilising the new residue with cement. Better results were obtained when immobilising with micro silica.The high CaCl2·2H2O content of the new residue brought along clogging of the bag filter system. Adding 1.4% of CaO (or 1.9% of Ca(OH)2) to the residue already improved these inconveniences but again significantly changed the leaching behaviour of the residue.