Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
586389 | Journal of Loss Prevention in the Process Industries | 2013 | 14 Pages |
•Turbulence influences the interaction of various parameters related to pool fires.•Several CFD turbulence models exist for the simulation of pool fires.•This study compares for the first time the performance of the various models.•Standard, RNG, realizable k–ɛ; and standard k–ω models were tested on field data.•The standard k–ɛ model was found to simulate the experimental results most closely.
Pool fires are the most common of all process industry accidents. Pool fires often trigger explosions which may result in more fires, causing huge losses of life and property. Since both the risk and the frequency of occurrence of pool fires are high, it is necessary to model the risks associated with pool fires so as to correctly predict the behavior of such fires.Among the parameters which determine the overall structure of a pool fire, the most important is turbulence. It determines the extent of interaction of various parameters, including combustion, wind velocity, and entrainment of the ambient air. Of the various approaches capable of modeling the turbulence associated with pool fires, computational fluid dynamics (CFD) has emerged as the most preferred due to its ability to enable closer approximation of the underlying physical phenomena.A review of the state of the art reveals that although various turbulence models exist for the simulation of pool fire no single study has compared the performance of various turbulence models in modeling pool fires. To cover this knowledge-gap an attempt has been made to employ CFD in the assessment of pool fires and find the turbulence model which is able to simulate pool fires most faithfully. The performance of the standard k–ɛ model, renormalization group (RNG) k–ɛ model, realizable k–ɛ model and standard k–ω model were studied for simulating the experiments conducted earlier by Chatris et al. (2001) and Casal (2013). The results reveal that the standard k–ɛ model enabled the closest CFD simulation of the experimental results.