A numerical simulation model of cyclic hardening behavior of AC4C-T6 for LNG cargo pump using finite element analysis

This paper is concerned with the evaluation of cyclic hardening models within the stress–strain behavior of aluminum alloy AC4C-T6 that can be used to LNG cargo pump operating in cryogenic temperature. To insure the strength assessment of LNG cargo pump, material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 is investigated through FEA (Finite Element Analysis) with various hardening options including linear and non-linear hardening, isotropic and kinematic hardening, and combined hardening model. Monotonic tensile and cyclic tensile experiments for AC4C-T6 alloy were performed at room temperature and temperature of −165 °C. Parameters of each hardening model are obtained from the experimental data; thus five hardening models are numerically simulated thereafter. Appropriate hardening models which describe the cyclic stress–strain relationship are investigated through the simulations of cyclic hardening behavior by FEA. In order to verify the predicted behavior of cyclic hardening obtained by FEA, the results of FEA and those measured by experiments are compared.