Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
59557 | Chinese Journal of Catalysis | 2014 | 10 Pages |
The effects of Mn loading and water content on AgMn/HZSM-5 (AgMn/HZ) catalysts were investigated in the ozone catalytic oxidation (OZCO) of benzene in a continuous air flow at room temperature. The catalytic activity is closely related to the Mn loading, and the AgMn/HZ catalyst with 2.4 wt% Mn (AgMn/HZ(2.4)) had the highest activity and stability in benzene oxidation as a result of its large surface area and high MnOx dispersion. Temperature-programmed desorption of the used catalysts demonstrated that 2.4 wt% was also the optimal Mn loading for suppressing the accumulation of benzene and HCOOH over the catalyst surface after benzene oxidation. For AgMn/HZ catalysts with Mn loadings ≤ 2.4 wt%, O3 decomposition to active oxygen species (O*) plays the most important role in benzene oxidation; however, benzene activation is the crucial step for benzene oxidation by O3 over AgMn/HZ catalysts with Mn loadings > 2.4 wt%. The AgMn/HZ(2.4) catalyst was then used to perform OZCO of benzene in a humid stream. Compared with dry gas, water vapor greatly enhanced the activity and stability of the AgMn/HZ(2.4) catalyst, and 0.1–0.2 vol% was the optimal water content for benzene oxidation.
Graphical AbstractAgMn/HZSM-5 catalyst with Mn loading of 2.4 wt% has the best activity and stability. O3 decomposition is crucial for AgMn/HZSM-5 (Mn loading ≤ 2.4 wt%), whereas benzene activation is important for AgMn/HZSM-5 (Mn loading > 2.4 wt%). Water vapor greatly enhances the OZCO reactivity and stability.Figure optionsDownload full-size imageDownload as PowerPoint slide