Direct electrochemistry and voltammetric determination of midecamycin at a multi-walled carbon nanotube coated gold electrode

Macrolide antibiotics generally shows slow electron-transfer rate and produces insensitive redox peaks at conventional electrodes. In this paper, we studied the electrochemical behavior of midecamycin, one of macrolide antibiotics, at a multi-walled carbon nanotube (MWNT) modified gold electrode. It was found that MWNT could adsorb midecamycin and promote its direct electron-transfer. Hence midecamycin exhibited a more sensitive anodic peak at the modified electrode. The electrochemical process showed the feature of a mixed-control system of diffusion and adsorption. Under the optimized conditions (i.e. pH 7.0 phosphate supporting electrolyte, 5 μl 0.5 mg ml−1 multi-walled carbon nanotube suspension for Ø = 2.0 mm electrode, accumulation at −0.8 V for 150 s), the anodic peak current was linear to midecamycin concentration in the range of 5 × 10−7 to 2 × 10−5 M, with a correlation coefficient of 0.998. For a 5 × 10−6 M midecamycin solution, ten repetitive measurements gave a relative standard deviation of 2.2%. This method was successfully applied to the determination of midecamycin in medicine tablet and the recovery was 97.5–104.0%.

Graphical abstractOwing to the catalysis and adsorption of multi-walled carbon nanotube (MWNT) macrolide antibiotics midecamycin can present direct electron-transfer phenomenon and produce a sensitive anodic peak at a MWNT film coated gold electrode.Figure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Multi-walled carbon nanotube (MWNT) promotes the electron-transfer of midecamycin. ► Direct electrochemistry of midecamycin is achieved at MWNT modified electrode. ► A sensitive voltammetry is developed for midecamycin