Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
615418 | Tribology International | 2012 | 8 Pages |
In the operation of a machine tool (MT), the frictions in ball bearings entail sudden and violent heating of the balls which dominants its thermal deformation, and subsequently results in degradation of its accuracy and performance. Modeling of the heat generation in a bearing is a quite difficult job because of the constantly changing characteristics. In this paper, an analytical approach was proposed to calculate the heat generation rate of supporting bearing in a ball–screw system of the MT, with consideration of the operating conditions, such as rotation speed and external loads of the machine tool. The influences of operating conditions to internal load distribution, contact angles and heat generation rate of ball bearings were analyzed. The friction torque due to the applied load and the sliding torque within the contact area were discussed in detail. Experiments were carried out in a high-speed ball–screw system to verify the validity of the presented analytical method. The work described in this paper can be seen as a foundation for the accuracy thermal modeling and thermal dynamic analysis of the ball–screw system in the machine tools.
Graphical AbstractAn analytical approach to calculate the heat generation rate of supporting bearing in a kind of feed system was proposed, which takes into account of the operating conditions, such as rotation speed and external loads of the feed system. The calculation of torques in the support bearing is mainly focused on both of the friction torque due to the applied load and the sliding torque within the contact area. Furthermore, experiments were carried out in a high-speed feed system to verify the validity of the introduced analytical method. The work described in this paper can be seen as a foundation for the accuracy thermal modeling and thermal dynamic analysis of the feed system in machine toolsFigure optionsDownload full-size imageDownload high-quality image (127 K)Download as PowerPoint slideHighlights►With gyroscopic moment, the load distribution of the bearing elements was studied. ► The elliptic contact area parameters between the element and raceway were calculated. ► The sliding friction torque within the elliptical contact area was calculated. ► The influence of operating conditions to ball bearing heat generation was analyzed.