Comparative tribological study of air plasma sprayed WC–12%Co coating versus conventional hard chromium electrodeposit

In this work, the properties of air plasma sprayed WC–12%Co coating before and after heat treatment were compared with the properties of the hard chromium electrodeposit. WC–12%Co coatings were heat treated at 650, 900 and 1150 °C for 1 h in an argon atmosphere. XRD patterns confirmed the formation of an amorphous phase in the as-sprayed coating. This amorphous phase gradually transformed to η-carbides in the course of heat treatment of the coating. This transformation was confirmed by the XRD analysis of the coatings heat treated above 900 °C. Pin-on-disc wear test results showed that WC–12%Co coatings had a significantly better tribological performance as compared with that of the hard chromium electrodeposits. The results also indicated that heat treatment of the WC–12%Co coatings at 900 °C gave the highest wear resistance among the coatings, which was due to the formation of hard η-carbides at this temperature.