Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
615740 | Tribology International | 2010 | 10 Pages |
Tribological test was carried out using a pin-on-disc geometry with textured SKD11 pin on bearing steel disc, under sliding in paraffin oil. Micro-grooved crosshatch pattern has been fabricated with various angles and widths. The effects of geometrical parameters on friction were mainly examined in mixed and elastohydrodynamic lubrication. The results show that friction control can be achieved by fabricating the micro-grooved crosshatch pattern on a contact surface. It is observed that each geometrical parameter of texture influence on friction, especially decrease of groove aspect ratio and increases of groove sliding length show friction reduction performance. Crucial parameter Gl was proposed for micro-grooved crosshatch texture. The friction mechanism is explained by micro fluid flow with limited theoretical approach.