Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
616200 | Tribology International | 2009 | 7 Pages |
It is well known that the environment humidity and temperature have a significant influence on the flying height of an air bearing slider. However, not many research papers address this topic, especially when the transient flying response is considered. This paper studies the influences of the environment humidity and temperature on both the stationary and transient flying responses of slider by simulation. A slider design for the thermal protrusion application is addressed. The reason for causing the drop of the air bearing pressure is discussed, and the methods for decreasing the drop are proposed. It is observed that the environment humidity and temperature may determine whether the slider is in full flying state or in partial flying/partial dragging state, when the slider is released from a certain height. The reason may be due to the high humidity and temperature which weakens the air bearing. As a result, the air bearing becomes not strong enough to support well the full flying of slider when the influence of the intermolecular force is significant. Slider vibrations for the full flying case and the partial flying/partial dragging case are analyzed in frequency domain, and the slider vibration frequencies are discussed. It shows that the environment temperature and humidity have significant effects on both the stationary and transient flying responses of the slider.