On the fretting wear mechanism of Zr-alloys

Zirconium alloys are highly desirable in nuclear applications due to their transparency to thermal energy neutrons and for their high corrosion resistance. The main objective of this study is to investigate the fretting wear mechanism of Zr–2.5%Nb alloy. The experimental work was carried out in air at 265 °C, using a specially designed fretting wear tribometer. The transfer of material, the change in the wear volume and the maximum wear depth with the number of cycles were measured through 3D mapping of the topography of the fretted surface. SEM and Fourier Transform Infrared Interferometry methods were used to examine the microspall pits and to measure the distribution of the thickness of oxide layer in the fretting region. For relatively small slip amplitude, the results showed that the fretting wear mechanism is initially dominated by adhesion and abrasion actions and then by delamination and surface fatigue. The time variation of the wear losses was shown to be cyclic until a steady state value is reached. At high slip amplitudes, however, abrasion and delamination are the only dominant wear mechanisms. The volumetric wear losses were found to decrease monotonically with the number of cycles. A novel approach was introduced, whereby the thermal and electrical contact resistances of the fretting interface are simultaneously measured. The results demonstrated the potential use of this non-intrusive approach for real-time monitoring of the fretting wear mechanism.