Preparation and tribological properties of the carbon nanotubes–Ni–P composite coating

A method to prepare the carbon nanotubes (CNTs)–Ni–P composite coating with different mass content of CNTs on the surface of 45# steel by electroless plating was proposed. The transmission electron microscopy (TEM) and the scanning electron microscopy (SEM) were used to observe the appearance of the as-prepared CNTs and the CNTs–Ni–P composite coating, and then the roughness of the coating surface was also analyzed by atomic force microscopy (AFM). Furthermore, the wear and friction behavior of the CNTs–Ni–P composite coating were investigated under oil-lubricated condition, Due to the self-lubrication property and the unique antifriction structure, CNTs can greatly improve the wear resistance of the CNTs–Ni–P composite coating, where the wear resistance of the CNTs–Ni–P composite coating is optimized with the intermediate mass content of 2 kg/m3 CNTs.