Article ID Journal Published Year Pages File Type
618570 Wear 2009 8 Pages PDF
Abstract
Legislative restriction on effluent disposal has resulted in an increase in the environmental costs of chemical milling and replacement methods are being sought. Abrasive water jet cutting (AWJ) is a mature process that is employed to through cut materials that are difficult to process by more conventional methods and the process is also being developed for controlled depth milling (CDM) to produce three-dimensional features which in the past might have been produced by chemical or etching processes. A major problem to be solved when using AWJ as a CDM technique is that of tolerance on depth, surface waviness and surface roughness of the milled area. In the current work, the effects of milling parameters on the surface characteristics are investigated when milling a titanium alloy (Ti6Al4V) with different abrasives, namely white and brown aluminium oxide, garnet, glass beads and steel shot. It has been demonstrated that the ratio between the hardness of the workpiece and the abrasive is more important than particle shape. Material removal rate and surface roughness increased when particle hardness is increased. Shape factor and particle hardness have no significant effect on surface waviness. For the abrasives investigated; traverse speed is shown to govern the operative mechanism of material removal and thus the material removal rate. It is also shown that the surface waviness can be reduced as the traverse speed is increased whilst, the surface roughness is not strongly dependent on traverse speed.
Related Topics
Physical Sciences and Engineering Chemical Engineering Colloid and Surface Chemistry
Authors
, , ,