Unlubricated sliding and rolling wear of thermoplastic dynamic vulcanizates (Santoprene®) against steel

The friction, sliding and rolling wear characteristics of thermoplastic dynamic vulcanizates (TPV; Santoprene® grades), composed of polypropylene (PP), ethylene/propylene/diene rubber (EPDM) and extender oil, were studied against steel counterparts in dry condition. The composition and basic mechanical properties of the TPV of various hardness (Shore A = 60°, 70° and 80°) were evaluated. The wear performance of the TPVs was investigated in different tribotests, viz. pin-on-plate (POP), cylinder-on-plate (fretting) and rolling ball-on-plate (RBOP), whereby “plate” was always the rubber. From the above tests the coefficient of friction (COF) and specific wear rate were determined. It was established that with increasing hardness usually both COF and the specific wear rate were reduced. Values of the COF and wear rate depended strongly on the configuration and testing parameters of the related tribotests. The wear mechanisms were concluded by inspecting the worn surfaces by white light profilometry and scanning electron microscopy (SEM), respectively, and discussed.