Application of ultrafiltration hybrid membrane processes for reuse of secondary effluent

This study evaluates the factors affecting pretreatment conditions for hybrid UF membrane processes for reuse of secondary effluent from the sewage treatment plant. The experimental results obtained from the ultrafiltration (UF) membrane process showed that the particles of the size range between 0.2 and 1.2 μm caused a significant impact on membrane fouling in all cases even with or without the coagulation process. As pretreatment of UF membrane process, the coagulation significantly improved the permeate flux. Optimal flux improvement was seen at an alum dose of 50 mg/L. In addition, it was found that the permeate flux was least declined under the coagulation condition of charge neutralization (pH 5.0). Also, the powdered activated carbon (PAC) adsorption enhanced the permeate flux. Application of the direct filtration as a pretreatment of UF membrane process was also very effective in reducing the UF membrane fouling.