Preoperational assessment of solute release from waste rock at proposed mining operations

Common concerns regarding waste rock are generation of acidic drainage and release of heavy metals and sulfate. Key solid phases in the assessments are those that dissolve to release acid and sulfate (iron sulfides, soluble iron sulfates, hydrated iron-sulfate minerals, minerals of the alunite-jarosite group), those that dissolve to neutralize acid (calcium and magnesium carbonates, silicate minerals), and those that release trace metals (trace metal sulfides, hydrated trace metal-sulfate minerals). Conventional mineralogic, petrographic, and geochemical analyses generally can be used to determine the quantities of these minerals present and to describe characteristics that influence their dissolution. A key solid-phase characteristic is the mineral surface area exposed for reaction, which is influenced by mode of occurrence (included, interstitial, liberated) and the extent of mineral surface coating. Short-term dissolution tests can estimate the extent of hydrated sulfate minerals present. Longer term dissolution tests are necessary to describe the dependence of drainage pH and solute release rates on solid-phase variation. The extensive data compiled from baseline pre-development definition, the operational plan, solid-phase characterization, and dissolution testing are ultimately synthesized by means of a modeling exercise requiring considerable technical and scientific expertise. The predicted rates (model outputs) are expressed as probability distributions to allow assessment of risk. This exercise must be technically defensible and transparent so that regulators can confidently assess the results and evaluate the operational plan proposed. Technical and non-technical challenges involved in implementing such programs are identified to benefit management planning for both industry and government.