The interaction of water vapors with H3PO4 imbibed electrolyte based on PBI/polysulfone copolymer blends

The interaction of steam with phosphoric acid imbibed electrolyte composed of PBI/PPy(50)coPSF 50/50 polymer blend and its effect on fuel cell performance was studied regarding its permeability through and its chemical interaction with the membrane. It was found that steam is the only gas that permeates the membrane with a permeability coefficient 1.1 × 10−14 mol cm cm−2 s−1 Pa−1 at 150 °C. This is attributed either to the high solubility of water in phosphoric acid or to the chemical interaction with pyrophosphoric acid. The latter was demonstrated by carrying out TGA experiments under various water vapor partial pressures. Water reacts with pyrophosphoric acid in order to maintain the equilibrium concentration of phosphoric acid at high level, thus improving proton conductivity and fuel cell performance. In addition it is shown that excess water dissolves in the membrane thus maintaining the “membrane/acid” system at high hydration level. This depends both on temperature and steam partial pressure. Although in the present study it is shown that steam plays a significant role in the performance of the high temperature Polymer electrolyte membrane (PEM) fuel cell, nevertheless its feed with humidified gases is not necessary, due to the back transport of the water produced at the cathode.