Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6386448 | Journal of Contaminant Hydrology | 2015 | 15 Pages |
Abstract
Matrix diffusion and sorption are important processes controlling radionuclide transport in crystalline rocks. Such processes are typically studied in the laboratory using borehole core samples however there is still much uncertainty on the changes to rock transport properties during coring and decompression. It is therefore important to show how such laboratory-based results compare with in situ conditions. This paper focuses on laboratory-scale mechanistic understanding and how this can be extrapolated to in situ conditions as part of the Long Term Diffusion (LTD) project at the Grimsel Test Site, Switzerland. Diffusion and sorption of 137Cs+, 22Na+, 125I- and tritiated water (HTO) in Grimsel granodiorite were studied using through-diffusion and batch sorption experiments. Effective diffusivities (De) of these tracers showed typical cation excess and anion exclusion effects and their salinity dependence, although the extent of these effects varied due to the heterogeneous pore networks in the crystalline rock samples. Rock capacity factors (α) and distribution coefficients (Kd) for Cs+ and Na+ were found to be sensitive to porewater salinity. Through-diffusion experiments indicated dual depth profiles for Cs+ and Na+ which could be explained by a near-surface Kd increment. A microscopic analysis indicated that this is caused by high porosity and sorption capacities in disturbed biotite minerals on the surface of the samples. The Kd values derived from the dual profiles are likely to correspond to Kd dependence on the grain sizes of crushed samples in the batch sorption experiments. The results of the in situ LTD experiments were interpreted reasonably well by using transport parameters derived from laboratory data and extrapolating them to in situ conditions. These comparative experimental and modelling studies provided a way to extrapolate from laboratory scale to in situ condition. It is well known that the difference in porosity between laboratory and in situ conditions is a key factor to scale laboratory-derived De to in situ conditions. We also show that cation excess diffusion is likely to be a key mechanism in crystalline rocks and that high Kd in the disturbed surfaces is critically important to evaluate transport in both laboratory and in situ tests.
Related Topics
Physical Sciences and Engineering
Earth and Planetary Sciences
Earth-Surface Processes
Authors
Yukio Tachi, Takanori Ebina, Chizuko Takeda, Toshihiko Saito, Hiroaki Takahashi, Yuji Ohuchi, Andrew James Martin,