Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
640807 | Separation and Purification Technology | 2015 | 6 Pages |
•The effect of the isothermal maintenance time on gas permeances was studied.•High separation coefficients of He/CH4, H2/CH4 and CO2/CH4 were achieved.•CMS hollow fiber membranes have been prepared by the pyrolysis of PI precursor.•The membrane which remained for 60 min at 1173 K exhibit lower gas permeances.•Real selectivities of He/CH4, H2/CH4, He/N2 and H2/N2 are higher than the calculated.
In the present study carbon molecular sieve (CMS) hollow fiber membranes have been produced by using P84 co-polyimide as precursor material and Argon as inert gas at three different pyrolysis procedures. Specifically, the pyrolysis conditions varied in terms of isothermal time (5, 30 and 60 min) at a final pyrolysis temperature of 1173 K. The pure gas permeance measurements of He, H2, CO2, O2, N2 and CH4 purge gases were carried out for all produced carbon hollow fiber membranes (CHFMs) at 333 K. Results show that a longer isothermal time (or the maintenance time) on the higher temperatures results in more selective but less productive CMS membranes. The produced carbon hollow fiber membranes present very high permselectivity values, especially for helium and hydrogen gaseous mixtures. In fact, the maximum ideal selectivity values obtained for He/CH4, H2/CH4 He/N2 and H2/N2 gas couples were up to 2925, 5500, 350 and 600 respectively. Furthermore, gas mixture experiments present higher selectivity values than the corresponding calculated.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide