Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6427538 | Earth and Planetary Science Letters | 2016 | 12 Pages |
â¢First experiments where shear stress, pore pressure and permeability are simultaneously measured during a dehydration reaction.â¢Dehydration product is preferentially localized along R1 Riedel shears.â¢Gypsum dehydration induces transient slip weakening controlled by permeability and pore-fluid pressure evolution.â¢Fluid pressure pulse can be generated by permeability changes during gypsum dehydration.â¢Conditions necessary for unstable slip during dehydration are identified.
A conflict has emerged from recent laboratory experiments regarding the question of whether or not dehydration reactions can promote unstable slip in subduction zones leading to earthquakes. Although reactions produce mechanical weakening due to pore-fluid pressure increase, this weakening has been associated with both stable and unstable slip. Here, new results monitoring strength, permeability, pore-fluid pressure, reaction progress and microstructural evolution during dehydration reactions are presented to identify the conditions necessary for mechanical instability. Triaxial experiments are conducted using gypsum and a direct shear sample assembly with constant normal stress that allows the measurement of permeability during sliding. Tests are conducted with temperature ramp from 70 to 150â°C and with different effective confining pressures (50, 100 and 150 MPa) and velocities (0.1 and 0.4 μmâsâ1). Results show that gypsum dehydration to bassanite induces transient stable-slip weakening that is controlled by pore-fluid pressure and permeability evolution. At the onset of dehydration, the low permeability promoted by pore compaction induces pore-fluid pressure build-up and stable slip weakening. The increase of bassanite content during the reaction shows clear evidence of dehydration related with the development of R1 Riedel shears and P foliation planes where bassanite is preferentially localized along these structures. The continued production of bassanite, which is stronger than gypsum, provides a supporting framework for newly formed pores, thus resulting in permeability increase, pore-fluid pressure drop and fault strength increase. After dehydration reaction, deformation is characterized by unstable slip on the fully dehydrated reaction product, controlled by the transition from velocity-strengthening to velocity-weakening behaviour of bassanite at temperature above â¼140â°C and the localization of deformation along narrow Y-shear planes. This study highlights the generic conditions required to trigger instabilities during dehydration reactions. It shows that pore-fluid pressure build-up during dehydration reactions associated with the localization of a velocity-weakening reacting or dehydrated phase along shear planes is necessary for earthquake triggering.
Graphical abstractDownload high-res image (68KB)Download full-size image