Bedrock detection beneath river terrace deposits using three-dimensional electrical resistivity tomography

We describe the use of a fully volumetric geophysical imaging approach, three-dimensional electrical resistivity (3D ERT), for bedrock detection below mixed sand and gravel deposits typical of fluvial valley-fill terraces. We illustrate the method through an analysis of terrace deposits of the Great Ouse River (UK), where up to 4 m of sand and gravel have filled the valley bottom during the latest Pleistocene. We use an edge detector to identify the steepest gradient in first-derivative resistivity profiles, which yields an estimate of bedrock depth (verified by drilling) to a precision better than 0.2 m (average) and 0.4 m (standard deviation). Comparison of a range of drilling techniques at the site has revealed that borehole derived interface depths suffered from levels of uncertainty similar to those associated with the 3D ERT - indicating that the reliability of bedrock interface depths determined using these two approaches is comparable in this case. The 3D ERT method provides a high spatial resolution that enabled a previously unknown erosional bedrock structure, associated with the change from deeper first terrace to second terrace deposits, to be identified in the Great Ouse valley. The method provides a relatively quick method to quantify terrace fill volume over large sites to a greater degree of precision than currently available.