Article ID Journal Published Year Pages File Type
644456 Applied Thermal Engineering 2016 11 Pages PDF
Abstract

•Enhancing glow intensity to get better in-cylinder micro combustion was proposed.•A miniature IC engine of 0.99 cc displacement was modified, reassembled and tested.•Increasing glow intensity has no remarkable improvement for normal combustion.•Enhancing glow intensity contributes to abating misfiring for abnormal combustion.•Electrical heating glow-ignition is an underlying way for meso-scale IC engines.

Combustion efficiency and combustion stability in micro space are the key constraints to scale down the structure of the miniature internal combustion engines from small-scale to meso-scale. For the glow-ignition combustion mode of the miniature internal combustion engines, enhancing the glow intensity of platinum wire by additional electrical heating to get better combustion characteristics was proposed. An experimental platform for combustion test was set up, and glow-ignition combustion characteristics of a miniature internal combustion engine with displacement of 0.99 cc were diagnosed. It is indicated that improvement of in-cylinder combustion characteristics due to enhancing the glow intensity is not obvious under normal combustion condition; instead, with the increasing of the glow intensity, cyclic variations as well as misfiring phenomenon have a tendency of deterioration. However, under severe partial burning and misfiring conditions, enhancing the glow intensity can remarkably decrease the high rate of misfiring, get better combustion stability and broaden the limiting combustion regime, showing a real effect at least partly to advance the starting time of combustion and shorten the combustion duration. Electrical heating glow-ignition combustion can be considered as one of underlying approaches to extend the limit of combustion stability for prospective meso-scale internal combustion engines.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide

Related Topics
Physical Sciences and Engineering Chemical Engineering Fluid Flow and Transfer Processes
Authors
, , , , , ,