Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6457384 | Solar Energy Materials and Solar Cells | 2017 | 5 Pages |
â¢The interfacial TiO2/SiO2/TiO2 trilayer has been used for the first time in hybrid-integrated multijunction architecture.â¢The TiO2/SiO2/TiO2 trilayer has achieved ~15% averaged reflection comparable to As2Se3 in the NIR range of 1200~1800 nm.â¢A similar hort-circuit current density of 7 mA/cm2 has been realized with both As2Se3 and trilayer, even with some air gaps in between.â¢About 5% averaged reflection in the NIR range of 1200~1800nm has been simulated with the ideal top ARC, bringing at least 10% boost of EQE.
To make full use of the NIR spectrum, the three-junction (3Â J) solar cells with bandgaps of 1.9/1.4/1.0Â eV have been transfer-printed on top of microscale Ge solar cells with two different interfacial materials. The interfacial material consisting of TiO2/SiO2/TiO2 trilayer has been used for the first time and hold about 15% averaged reflection comparable to As2Se3 in the NIR range of 1200-1800Â nm, which means that the trilayer is of high crystalline quality with gradually varied refractive index and acting as the role of light-trapping to reduce interfacial reflection. Measured EQE curves over a standard AM1.5D spectrum yield a short-circuit current density of 7Â mA/cm2 for Ge cells with both As2Se3 and trilayer, which means that the trilayer is qualified for replacing As2Se3 with outstanding antireflective properties. NIR optical images have confirmed the existence of air gaps between interfaces of some cells, which exhibit similar response to those without air gaps in the measurements of reflectance and EQE curves, showing great accommodation in mass production of this multijunction architecture.