Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
655009 | International Journal of Heat and Fluid Flow | 2015 | 12 Pages |
•A hyperbolized two-fluid model is presented for a pipeline–riser system.•The coupling of severe slugging and hydrodynamic slugging is realized.•Accurate predictions are obtained with consideration of the coupling effect.•The effect of hydrodynamic slugs on severe slugging is addressed.
A numerical study based on a one-dimensional two-fluid model is carried out to describe the transient hydrodynamic slugging and terrain-induced severe slugging in a pipeline–riser system. The system of equations is rendered well-posed by interfacial pressure model for the riser. The selected flow conditions are restricted in the well-posed region for the horizontal and the downward inclined pipes to ensure the hydrodynamic slug characteristics are predicted correctly. The validity of the model is examined by water faucet problem and horizontal slug flow experiments. Simulations with and without slug capturing are conducted to address the effect of hydrodynamic slugs on severe slugging. It has been found that more accurate predictions are obtained by taking hydrodynamic slugs into account. At low superficial gas velocity, the simulation without slug capturing tends to overestimate the severe slugging period. When hydrodynamic slugs are captured, the upstream gas expansion is suppressed by the hydrodynamic slugs. At relatively high superficial gas velocity, the simulation without slug capturing tends to underestimate the severe slugging period. When hydrodynamic slugs are captured, the upstream compressible volume is greatly enlarged by the blowout of the hydrodynamic slugs. In both situations, the influences of the hydrodynamic slugs can reduce the errors of the predicted severe slugging characteristics.