Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
656927 | International Journal of Heat and Mass Transfer | 2015 | 11 Pages |
Abstract
Conventional double-layered microchannel heat sink (DL-MCHS) significantly improves temperature uniformity on the bottom wall due to temperature compensation between the two layers through conduction. However, temperature of the top coolant is always higher than that of the bottom coolant in the inlet region of bottom channels, which inevitably leads to a heating effect of the top coolant on the bottom coolant. To prevent the heating effect, a new DL-MCHS with truncated top channels was proposed in our previous study. To further enhance the cooling performance of the new design, multi-parameter optimizations are performed at various fixed pumping powers Ω and fixed coolant volumetric flow rates Qv, respectively. The optimization algorithm is composed of a three-dimensional solid-fluid conjugate heat sink model and a simplified conjugate-gradient method. Overall heat resistance R is the objective function to be minimized with channel number N, channel height Hc, channel width Wc, and the dimensionless truncation length of top channels l as search variables. With a constant heat flux of 100 W cmâ2 applied to the bottom wall, and a constant Ω of 0.05 W, the optimal design has N = 55, Wc = 0.116 mm, Hc = 0.525 mm, l = 0.28, and R = 0.102 K Wâ1. However, with a constant Qv = 200 ml minâ1, the optimal design has N = 79, Wc = 0.026 mm, Hc = 0.175 mm, l = 0.38, and R = 0.093 K Wâ1. The improvements of cooling performance for constant Ω and constant Qv are all attributed to the enhancement of cooling effect and/or the reduction of heating effect. Finally, the design directions of the four search variables are given at various Ω and Qv.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Fluid Flow and Transfer Processes
Authors
Chuan Leng, Xiao-Dong Wang, Tian-Hu Wang, Wei-Mon Yan,