Article ID Journal Published Year Pages File Type
660673 International Journal of Heat and Mass Transfer 2008 11 Pages PDF
Abstract

The characteristics of a pressure-driven water flow including flow micro-structures and pressure drops are investigated in serpentine micro-channels with miter bends. The micro-channels have rectangular cross-sections with hydraulic diameters of 0.209 mm, 0.412 mm and 0.622 mm, respectively. To segregate the bends and entrance effects individually from the total pressure drop, for each size three types of micro-channels: straight short, straight long and long serpentine, were fabricated to get the reliable pressure data without entrance effect. A micron-resolution particle image velocimetry system (micro-PIV) was develop and used to obtain the detailed velocity vector field. The experimental results show that the vortices around the outer and inner walls of the bend do not form when Re < 100. Those vortices appear and continue to develop with increasing Re number when Re is larger than a value around 100, and the shape and size of the vortices almost remain constant when the Re is larger than a value around 1000. The experimentally observed additional pressure drop due to the bend is commensurate with the strength of the calculated vortices. The bend loss coefficient Kb was observed to be related only with the Re number when Re < 100, but with the Re number and channel size when Re > 100. It almost keeps constant and changes in the range of ±10% when the Re is larger than a threshold value somewhere in 1000–1500.

Related Topics
Physical Sciences and Engineering Chemical Engineering Fluid Flow and Transfer Processes
Authors
, ,