Article ID Journal Published Year Pages File Type
6630612 Fuel 2018 13 Pages PDF
Abstract
Based on the premise of steady state operation, the HDS reaction happened in the three-phase trickle-bed reactor was simulated by combining the mass transfer, reaction kinetics model and physical property data of LTCT. The results show that the experimental and simulated values of sulphur content at the exit of the reactor are within the error range of 5%. By simulating the whole-fraction LTCT HDS reactor, the pattern of changes in the concentrations of hydrogen sulfide, hydrogen and sulfur in gas, liquid and solid phases according to the length of the reactor were obtained. Based on this, this paper discusses on the impacts of each process parameter and hydrogen sulfide partial pressure on LTCT HDS, and works out the reaction characteristics of whole-fraction LTCT HDS different from crude oil fraction. Finally, this paper analyzes the influence of different process conditions on internal gradients of catalyst, and concludes the influence of each parameter on effectiveness factor of particle. The increase of temperature, decrease of pressure or increase of LHSV can all cause the decrease of effectiveness factor, wherein the temperature has the most significant effect on the effectiveness factor, followed by LHSV, and pressure has the weakest effect. These findings contribute to a more in-depth understanding of the features and rules of LTCT HDS, and can also give us some guidance for industrial reactor simulation.
Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , , , , , ,