Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6660376 | The Journal of Chemical Thermodynamics | 2015 | 37 Pages |
Abstract
Removal of acid gases such as CO2 and H2S from natural gas is essential for commercial, safety and environmental protection that demonstrate the importance of gas sweetening process. Ionic liquids (IL) have been highly demanded as a green solvent to remove acid gases from sour natural gas and capturing of CO2 from flue gases. In this work, the solubility of CO2 in 1-butyl-3-methylimidazolium acetate ([bmim][Ac]) is measured at temperatures (303.15, 328.15, 343.15) K and pressure range of (0.1 to 3.9) MPa. Moreover, the experiments are carried out for simultaneous measurements of (CO2 + H2S) (70% + 30% on a mole basis) solubility in the same ionic liquid at T = (303.15, 323.15, 343.15) K and a pressure range of (0.1 to 2.2) MPa. To model the solubility of acid gases in IL, both physical and chemical equilibria are applied so that the (vapour + liquid) equilibrium calculation is carried out through Cubic-Plus-Association (CPA) EoS. The reaction equilibrium thermodynamic model is used in liquid phase so that the chemical reaction is taking place between IL and acid gasses. The Henry's and reaction equilibrium constants are obtained though optimization of the solubility data. Using CPA EOS, the pure parameters of [bmim][acetate] are optimised and consequently using these parameters, gas partial pressure calculation is performed for the (CO2 + IL) and (CO2 + H2S + IL) systems. For the (CO2 + IL) system, the percent average absolute deviation (AAD%) of 4.83 is resulted and for the (H2S + CO2 + IL) system the values of 18.8 and 13.7 are obtained for H2S and CO2, respectively.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Chemical Engineering (General)
Authors
Ali Haghtalab, Alireza Kheiri,