Article ID Journal Published Year Pages File Type
669807 International Journal of Thermal Sciences 2007 13 Pages PDF
Abstract

In this paper, numerical simulations of laminar, steady, two-dimensional natural convection flows in a square enclosure with discrete heat sources on the left and bottom walls are presented using a finite-volume method. Two different orientated wall boundary conditions are designed to investigate the natural convection features. The computational results are expressed in the form of streamlines and isothermal lines for Rayleigh numbers ranging from 102 to 107 in the cavity. In the course of study, a combination of third-order and exponential interpolating profile based on the convective boundedness criterion is proposed and tested against the partially heated cavity flow up to the highest Rayleigh number 107. The effects of thermal strength and heating length on the hydrodynamic and thermal fields inside the enclosure are also presented. Numerical results indicate that the average Nusselt number increases as Rayleigh number increases for both cases. Moreover, it is seen that the effect of the heat transfer rate due to the heating strength on the left wall is different from the one on the bottom. For the heater size effect, it is observed that by increasing the length of heat source segment, the heat transfer rate is gradually increased for both cases.

Related Topics
Physical Sciences and Engineering Chemical Engineering Fluid Flow and Transfer Processes