Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6715692 | Construction and Building Materials | 2018 | 10 Pages |
Abstract
Introducing of light-weight lateral load resisting systems, such as steel shear walls (SSW) is very beneficial for multi-storey buildings. Further improvement of such elements via introducing fibre reinforced polymer (FRP) materials is expected to allow increasing of their ultimate load capacity, stiffness and energy absorption. The aim of presented research is to compare the behaviour of modified SSW via inclusion of FRP in infill plate design. Produced and tested shear wall specimens are three different types: with steel infill plate (control), with FRP infill plate and with hybrid steel/FRP infill plate. All samples are loaded under quasi-static cyclic seismic loading as defined in ATC-24 protocol. The highest ultimate load capacity and lowest stiffness degradation is achieved for sample with glass FRP infill plate, followed by hybrid (carbon FRP/steel and glass FRP/steel) specimens. Highest cumulative energy absorption for predominant part of the investigated amplitudes was achieved for hybrid specimens. The obtained results indicate that the innovative shear walls with FRP and hybrid infill plates offer excellent load carrying capacity and energy absorption, relatively small loss of stiffness and potential for increased durability in comparison with conventional SSW systems.
Keywords
Related Topics
Physical Sciences and Engineering
Engineering
Civil and Structural Engineering
Authors
Natalja Petkune, Ted Donchev, Homayoun Hadavinia, David Wertheim, Mukesh Limbachiya,