Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6730970 | Energy and Buildings | 2015 | 29 Pages |
Abstract
Calibrating a simulation model is one of the most difficult tasks required to validate an energy conservation measure. To obtain an accurate calibration, it is necessary to collect all the performance data and estimate the missing information. In this study, a unique building with a heating and cooling system consisting of a ground-source heat pump and a radiant floor is simulated. The model was calibrated following ASHRAE and EVO specifications. The special characteristics of this building, located in Vigo in northwestern Spain, complicate the control of temperature and consequently the calibration. The simulation was performed with TRNSYS, and the optimization software GenOpt was used in an iterative calibration process. The results demonstrate that a simulation and calibration process using a detailed model with components from the TRNSYS library is sufficient to meet ASHRAE standards. In literature there is a lack of standards for calibration criteria and this article explains and uses a valid method that semi-automated the calibration process. It was possible to reduce the mean bias error and the coefficient of variation of the root mean squared error below 5% and 12%, respectively, by concentrating principally on the energy consumption of the system. The error made in the indoor temperature from the different airnodes was also investigated and an average value under 5% was obtained.
Related Topics
Physical Sciences and Engineering
Energy
Renewable Energy, Sustainability and the Environment
Authors
Antón Cacabelos, Pablo EguÃa, José LuÃs MÃguez, Enrique Granada, Maria Elena Arce,