Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6734437 | Energy and Buildings | 2013 | 12 Pages |
Abstract
The use of a water-saturated microencapsulated phase change material (MEPCM) layer as a passive thermal management medium for a building-integrated photovoltaic (BIPV) was modeled by CFD numerical simulation to explore the effects of different MEPCM melting points and MEPCM layer thicknesses on the thermal and electrical performance. The well-designed BIPV can hopefully remain at a relatively low temperature during peak sunshine hours due to the absorption of latent heat during the phase change of the MEPCM layer, which reduces the decrease in electric generation efficiency caused by the increase in temperature due to solar radiation, thereby enhancing the electric generation efficiency. The results showed that a BIPV integrated with a MEPCM layer produced a significant improvement in the thermal and electrical performance compared to an untreated PV module. Under local summer climatic conditions, a melting point of 30 °C and a 3-cm-thick MEPCM (using paraffin as the core material) layer are recommended for the thermal management medium.
Related Topics
Physical Sciences and Engineering
Energy
Renewable Energy, Sustainability and the Environment
Authors
C.J. Ho, Bor-Tyng Jou, Chi-Ming Lai, Chao-Yang Huang,