Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6738999 | Engineering Structures | 2018 | 11 Pages |
Abstract
Experimental studies showed that concrete shear walls reinforced exclusively with GFRP bars had satisfactory strength and stable cyclic behavior, making them suitable for use in areas with low seismic risk. However, in areas in which the lateral demands are higher, the GFRP reinforcement might be inadequate due to the brittle nature of the material, and its reduced energy dissipation capacity. In this study, a finite-element (FE) analysis model for hybrid GFRP-steel reinforced shear walls for moderate seismic demands was developed. The steel lent ductility to the system, while the GFRP material enhanced the self-centering ability of the wall to reduce permanent displacements. The analysis model was first validated with experimental results obtained from steel- and FRP-reinforced walls from literature, and then used to determine the most suitable hybrid scheme combining ease of construction, maximum ductility, and minimum residual displacements. It was shown that hybrid walls have comparable strength and ductility to conventional steel-reinforced shear walls, while having better self-centering capacity under lateral loads. Simplified nonlinear dynamic analyses were conducted to study the performance of hybrid systems subjected to four earthquakes. The response of RC and hybrid steel-FRP walls were shown to be comparable when designed properly in terms of stiffness and serviceability.
Related Topics
Physical Sciences and Engineering
Earth and Planetary Sciences
Geotechnical Engineering and Engineering Geology
Authors
Sina Ghazizadeh, Carlos A. Cruz-Noguez, Fereshte Talaei,