Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6745596 | Fusion Engineering and Design | 2015 | 4 Pages |
Abstract
Feeders and coil terminal boxes (CTBs) of the superconducting magnets for JT-60SA have been designed. A small tool which can connect soldering joint with vertical direction in the cryostat has been developed. The joint resistance of the sample showed 1.7 nΩ at 2 T, 4.2 K, 20 kA which is within the requirement of <5 nΩ. A prototype feeder in CTB with crank shape was manufactured. The maximum dimensional error was 3 mm being within the requirement of ±10 mm. Feeder insulation samples showed a shear strength >60 MPa which is much higher than the requirement of 10 MPa as derived from analysis. Since all the manufacturing processes concerned have been proof-tested, the production of feeders and CTBs has been released.
Related Topics
Physical Sciences and Engineering
Energy
Energy Engineering and Power Technology
Authors
Kaname Kizu, Haruyuki Murakami, Kyohei Natsume, Katsuhiko Tsuchiya, Yoshihiko Koide, Kiyoshi Yoshida, Tetsuhiro Obana, Shinji Hamaguchi, Kazuya Takahata,