Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6756796 | Journal of Wind Engineering and Industrial Aerodynamics | 2018 | 9 Pages |
Abstract
Competitive hand-cycling represents a unique case for cycling aerodynamics as the athletes are in a relatively aerodynamic position in comparison to traditional able-bodied cyclists. There are some aerodynamic similarities between both cycling disciplines, including wheel designs and helmets. The lack of research in hand-cycling aerodynamics presents the potential for significant improvements. This research analysed the aerodynamics of competitive hand-cycling under crosswind conditions using wind-tunnel experiments and Computational Fluid Dynamics (CFD) simulations. A range of yaw angles from 0° to 20° in 5° increments were investigated for two separate hand-cycling setups; a road race and a time-trial setup. A maximum drag increase of 14.1% was found from 0° to 15° yaw, for a hand-cyclist equipped for a road race. The three disk wheels used for the TT setup had a large impact on the lateral forces experienced by the TT hand-cyclist. At just 5° yaw and at 15â¯m/s, the drag and lateral forces for the TT setup matched closely, while this event did not occur until 15° yaw at the same velocity for the road setup. For 20° yaw, the ratio of the lateral force to drag force was 1.6 and 5.6 for the road and TT setups respectively.
Related Topics
Physical Sciences and Engineering
Energy
Renewable Energy, Sustainability and the Environment
Authors
Paul Mannion, Yasin Toparlar, Bert Blocken, Eoghan Clifford, Thomas Andrianne, Magdalena Hajdukiewicz,