Effects of supplementary biomass firing on the performance of combined cycle power generation: A comparison between NGCC and IGCC plants

•Effect of biomass supplementary firing on the performance of NGCC and IGCC plants has been critically analyzed.•The variations in power ratings of the major plant equipment have been compared at different degree of supplementary firing.•Reduction in greenhouse gas emission due to biomass supplementary firing has been evaluated.

In the present work, effects of biomass supplementary firing on the performance of fossil fuel fired combined cycles have been analyzed. Both natural gas fired combined cycle (NGCC) and integrated coal gasification combined cycle (IGCC) have been considered in the study. The efficiency of the NGCC plant monotonically reduces with the increase in supplementary firing, while for the IGCC plant the maximum plant efficiency occurs at an optimum degree of supplementary firing. This difference in the nature of variation of the efficiency of two plants under the influence of supplementary firing has been critically analyzed in the paper. The ratings of different plant equipments, fuel flow rates and the emission indices of CO2 from the plants at varying degree of supplementary firing have been evaluated for a net power output of 200 MW. The fraction of total power generated by the bottoming cycle increases with the increase in supplementary firing. However, the decrease in the ratings of gas turbines is much more than the increase in that of the steam turbines due to the low work ratio of the topping cycle. The NGCC plants require less biomass compared to the IGCC under identical condition. A critical degree of supplementary firing has been identified for the slag free operation of the biomass combustor. The performance parameters, equipment ratings and fuel flow rates for no supplementary firing and for the critical degree of supplementary biomass firing have been compared for the NGCC and IGCC plants.