Article ID Journal Published Year Pages File Type
677513 Biomass and Bioenergy 2012 10 Pages PDF
Abstract

The objective of this study was to evaluate the production of ethanol by Scheffersomyces (Pichia) stipitis CBS6054, a native xylose fermenting yeast, from sugars contained in the giant reed (Arundo donax L.) hemicellulosic hydrolysate.A response surface methodology with two input parameters, severity factor and oxalic acid concentration ranging from 2.87 to 4.05 and from 2 to 8 (% w oxalic acid/w solid dry matter), respectively, was employed to minimize degradation products and maximize sugar release. However, at the optimum condition for sugar release (43.8 g l−1), levels of toxic degradation products (acetic acid, furfural, HMF and phenolic compounds) were considered too high for yeast fermentation. The condition to minimize degradation products and maximize sugar yields was judged to be 2.87 severity factor and 5.0% oxalic acid concentration. At this condition 26.0 g l−1 xylose, 5.0 g l−1 glucose and 2.4 g l−1 arabinose were recovered in giant reed hydrolysate fraction. Adjustment of pH to 5.0 with Ca(OH)2 decreased xylose, glucose and acetic acid, 22%, 8% and 27% respectively. Increasing the initial pH from 5.0 to 5.5, 6.0 and 6.5, respectively, significantly improved the fermentability of the giant reed hemicelluloses hydrolysate; no fermentation was observed at pH 5.0 after 96 h, while 8.20 g l−1 of ethanol was obtained at pH 6.0 after 48 h, with an ethanol yield of 0.33 (ge/gs) and a productivity of 0.17 g l−1 h−1. The optimum pH of acid hydrolysate fermentation for ethanol production was 6.0–6.5.

► Giant reed hemicellulose hydrolysate was fermented by Scheffersomyces stipitis CBS6054. ► Hemicelluose hydrolysate was obtained after RSM optimization for degradation products. ► Different pH for fermentation were used. ► Significant differences were observed among different pH tested. ► pH 6.0 resulted in significantly highest ethanol concentration and yield.

Related Topics
Physical Sciences and Engineering Chemical Engineering Process Chemistry and Technology
Authors
, , , ,