Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6777178 | Thin-Walled Structures | 2018 | 15 Pages |
Abstract
Steel circular hollow section tubes are widely used as tubular structural members, and impact accidents usually occur while these tubes are in their working states. This paper presents experimental studies on axially preloaded circular steel tubes subjected to transverse low-velocity mass impact. A total of 32 impact tests, representing four types of scenarios, are conducted to investigate the influences of preloading and the boundary condition on the structural responses of tubes. An axial force loading system is designed, and a bladder accumulator is adopted in the system to compensate for the axial compressive loading. The test processes of the tubes under transverse impact are described in detail, and four failure modes are identified. All specimens of the four scenario types deformed according to the three-hinge mechanism. Based on the test results, the influence and mechanism of axial force are proposed. The effects of axial tension, axial compression and the boundary condition on the structural behaviour of tubes are discussed. The results show that the axial tension can enhance the bending resistance and lateral collapse capacity of tubes, while the axial compression reduces the collapse capacity significantly. By comparing the responses of tubes under different boundary conditions, the lateral resistance of tubes and the structural response are shown to have a strong correlation with the axial constraint.
Related Topics
Physical Sciences and Engineering
Engineering
Civil and Structural Engineering
Authors
Xu-Dong Zhi, Rong Zhang, Feng Fan, Chao Huang,