| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 681000 | Bioresource Technology | 2014 | 6 Pages |
•ZSM-5 was modified using chemical liquid deposition (CLD) for biomass conversion.•The maximum hydrocarbon yield was obtained with KH550 modified ZSM-5.•The hydrocarbon yield was boosted by 50% compared to that obtained with pure ZSM-5.•The coke yield decreased from 44.1% with pure ZSM-5 to 26.7% with modified one.
Chemical liquid deposition (CLD) with KH550, TEOS and methyl silicone oil as the modifiers was used to modify ZSM-5 and deposit its external acid sites. The characteristics of modified catalysts were tested by catalytic conversion of biomass pyrolysis-derived compounds. The effects of different modifying conditions (deposited amount, temperature, and time) on the product yields and selectivities were investigated. The results show KH550 modified ZSM-5 (deposited amount of 4%, temperature of 20 °C and time of 6 h) produced the maximum yields of aromatics (24.5%) and olefins (16.5%), which are much higher than that obtained with original ZSM-5 catalyst (18.8% aromatics and 9.8% olefins). The coke yield decreased from 44.1% with original ZSM-5 to 26.7% with KH550 modified ZSM-5. The selectivities of low-molecule-weight hydrocarbons (ethylene and benzene) decreased, while that of higher molecule-weight hydrocarbons (propylene, butylene, toluene, and naphthalene) increased comparing with original ZSM-5.
