| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 692075 | Progress in Organic Coatings | 2016 | 7 Pages |
•Isosorbide monomer can be used in U.V. reactive coatings.•U.V. irradiation of isosorbide derivatives reveals high polymerization rates.•Isosorbide based coatings exhibit proper mechanical properties.
Isosorbide was involved in photopolymerization as a green monomer for UV-curable coatings. This polyol was modified by (meth)acryloyl chloride to obtain isosorbide di(meth)acrylate at a high yield in a one-step reaction. Various (meth)acrylated derivative monomers integrating polycaprolactone and poly(tetramethylene glycol) segments (CAPDA, PEGDA) were obtained according to the same route with high yield. Crosslinked materials were obtained by intense UV irradiation, and the details of the photopolymerization kinetics were determined via real-time FTIR. The effect of the chemical structure of the monomer was investigated, and the rigidity of the monomer was found to be the main parameter impacting the final conversion and photopolymerization rate. Isosorbide diacrylate (ISDA)-based materials were compared to PEGDA- and CAPDA-based materials and were found to have a higher glass transition temperature and moduli. To increase the amount of biobased monomers in the formulations, mixtures of ISDA/PEGDA at various ratios were tested. Finally, UV curing formulations from ISDA/PEGDA and ISDA/CAPDA were investigated with the addition of an adhesion promoter and were compared to Ebecryl 525® (a polyester resin from ALLNEX, formerly CYTEC). These formulations succeeded in more than 70% of the standard tests (abrasion, gloss, adhesion, deformation, and impact) and thus could be applied as coatings in various fields.
