The corrosion-inhibiting effect of polypyrrole films doped with p-toluene-sulfonate, benzene-sulfonate or dodecyl-sulfate anions, as coating on stainless steel in NaCl aqueous solutions

•Effect of coating of polypyrrole (PPy) films on the corrosion of stainless steel.•Study of large anions as doping of PPy in electrochemical behavior of SS/PPy system.•Voluminous anions into the PPy films, improve the protective properties of these films.

This article presents a study of the conditions for electro-synthesis of polypyrrole (PPy) films on stainless steel, in the presence of the anions p-toluene-sulfonate (pTS), benzene-sulfonate (BS) or dodecyl-sulfate (DS). Cyclic voltammetry (CV) was used in the synthesis of the polypyrrole films on the stainless steel (SS). These polymeric films were characterized by IR and UV–vis spectroscopy and their morphology and thickness were analyzed by scanning electron microscopy (SEM). Their performance as protective films against corrosive processes presented by the SS/PPy-pTS, SS/PPy-BS or SS/PPy-DS systems was evaluated in 0.1 M NaCl aqueous solution. The study of the corrosion processes of the stainless steel/polymer systems was conducted through measurements of open circuit potential (EOCP), polarization curves (PC) and electrochemical impedance spectroscopy (EIS). The results showed that the protective capacity of these polymeric systems on stainless steel, mainly with regard to pitting, depends on the nature of the anion dopant used during electro-synthesis of the PPy film. The best performance was seen with the dopants pTS and BS.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide